|
|
|
|
|
| |
BaiNa System equipment from the following four components
: 1.salt melting tank; 2.Vulcanization towers.
3.Categorization cleaning, cooling towers. 4.Cleaning
water collection and treatment beds.
Salt
bath melted groove
Curing
salt used for heating, melting. To provide molten
salt bath for curing, curing to receive from the
molten salt bath overflow
Sulfide groove
For the rubber vulcanization.
In the curing temperature of 200-280 ¡ã C curing
salt choose between BaiNa system accuracy than
¡À 2 ¡ã C temperature control. BaiNa groove through
molten salt for curing system and overflow into
the molten salt to ensure constant Level
Tank
cleaning and cooling classification
BaiNa classification flume
total 4. Rubber sink through every level, the
water was pumping through the flume, and through
high-pressure spray nozzles to rubber. Between
screens sealed by the high-pressure gas tank,
a water flume to the former level was not possible
to sink into the next level. After the first
class flume water heating, curing salt to enhance
the solubility of rubber as much as possible
to wash away the salt; not cleaning the water
tank behind the three heating, cooling rubber
will be used to the temperature. Practical tests
showed that the BaiNa grade cleaning system, the
first level of dissolved rubber flume brought
out more than 90% of salt. Accordingly, the
concentration is as high as 30-40% of the cleaning
water, surrounded by the collection of clean
water collection were carried out; The third
level at the end of the cleaning salt residue
on the rubber almost zero. BaiNa Tank Cleaning
System in the fourth grade to ensure that the
cleaning effect. Tank Cleaning level after level
of water added into the former camp, from the
first grade until the collection tank into the
bath.
|
Cleaning water
collection groove
This equipment together with
the salt melt groove of the first-class tank washing
water collection and treatment. Cleaning water
treatment principles of the pumps : a special
collection from intermittent to the bath water,
salt spray of molten bath. Groove instant high-temperature
molten salt spray water vapor will, pumping exhaust
system to suck out the moisture, salt crystallization
into molten salt beds re-use
Filtration
melting salt
BaiNa
full consideration to the design of molten salt
filters. The filter can be improved to ensure
the long-term cycle of curing salt used, while
eliminating the danger of fire and explosion
Waste gas and waste
residue
Curing
salt steam bath and spray the water vapor recovery
process. pumped from the exhaust system pumped
to the processing equipment for special cleansing
treatment. After dealing with the exhaust to reach
or even exceed environmental standards for emissions
standards. BaiNa system of waste, in the vulcanized
rubber bath is formed mainly of carbonate sediments.
salt bath in the small rubber particles and some
other impurities. After filtration system can
be filtered out by the professional company to
handle. DURFERRIT companies can provide professional
assistance to users. |
|
|
 |
| |
|
| |
|
