|
|
|
|
|
| |
It goes without saying that the LCM than the traditional
system, the BaiNa system production costs. Salt
and water consumption because of the low volume
and significantly lower; Compared with other curing
methods. BaiNa systems have shown increasing production
cost advantages. According CONTITECH (Slovakia),
the company's statistics, and UHF systems, BaiNa
about 35% of production costs. This is because
the BaiNa System Salt consumption low, on the other
hand, BaiNa system energy consumption is much lower
than UHF.
|
BaiNa-Salt
consumption system
BaiNa system for the recovery and recycling of curing
salt, the salt consumption of the entire system
so very little. Salt with a consumption of 30
tons / year of the very traditional production
LCM production lines BaiNa Salt consuming only about
one production line. 5 tons / year!
|
BaiNa-The
energy consumption
BaiNa system's energy consumption is much lower
than the UHF system. BaiNa Figure 8 is a production
line for the statistical distribution of energy
consumption. The production lines for the surface
trough 9m 2 curing salt, curing temperature to
250 ¡æ. Profile handled by the rubber strips for
car standards, the unit weight of 0.350kg/m. curing
speed of 25m/min, with the salinity of about 10kg/h
strip. 197kw/h total energy consumption to the
production line.
BaiNa-The system of water consumption
In BaiNa system, a clean
and efficient use of water, the water system so
minimal. With a water content of 50 tons / day
of the very traditional production BaiNa LCM production
lines in the water only about one production line.
5-2 tons / day! |
|
|
|
|
|
|
 |
| |
|
| |
|
