14 Oct, 2020

All extrusion processes require the generation of pressure within the material to be extruded. When materials are put under pressure heat is generated. This cannot be avoided but different extrusion t...

View Details

14 Oct, 2020

The rubber extruder barrel is normally supported in some way by the frame on which the whole system is mounted. If the extruder barrel moves, and this can happen sometimes even when the barrel is supp...

View Details

09 Oct, 2020

The steps of rubber extruder debugging are as follows: 　　 1. The temperature control check should be done before starting to make sure that the temperature control is normal, the instrument is normal,...

View Details

29 Sep, 2020

The head of the rubber extruder machine is installed on the rubber extruder. The correct installation of the rubber extruder head is the basic condition to keep the rubber extruder in good working con...

View Details

29 Sep, 2020

1. Feeding section 　　It is also called the solid conveying section, which starts from the feed port until the rubber melts. After the rubber material enters the feed port, under the push of the rotati...

View Details

25 Sep, 2020

You might be surprised to know that the rubber in your tires and so many other modern uses begins as a white, liquid type substance called latex that is derived from certain plants. If you cut a dande...

View Details

23 Sep, 2020

With the emergence and wide application of rubber extruder machine, the application range of hot feed extruders is gradually shrinking. Rubber extruders have developed from hot feed to cold feed, and ...

View Details

18 Sep, 2020

The rubber hot air oven is an electrical device which is used in the various industries. The device uses hot dry steam for the sterilization of the products used in the industries. The industrial oven...

View Details

16 Sep, 2020

The extruder has two different types depending on the drive. These are Direct extruder and Bowden extruder. Direct extruderIn direct extruders, the hot end and cold end are simply attached together. I...

View Details