How to control the operating temperature of the rubber extruder: When the rubber enters the screw tube through the feeding system, it will be heated and plasticized, and then cut, compressed and mixed by the screw. It is extruded into the desired product shape on the die of a rubber extruder. During...

There are many types of rubber extruders. When purchasing rubber extruders, we should purchase them according to the purpose of the equipment. The configuration and design of different rubber extruders are different, but no matter what kind of rubber extruder, the working methods and processes in th...

Rubber extruder is a basic equipment in the rubber industry and one of the key pieces of equipment affecting product quality. It plays a very important role in the production process of tires and rubber products. The development of foreign rubber extruders has experienced plunger extruders, screw-ty...

"GRTE - Global Rubber, Latex & Tyre Expo" is a global meeting point for the rubber, latex & tire industries. This event is jointly organized by TechnoBiz and China United Rubber Corporation with support from local and international rubber-related associations and research organizations. The ...

Maintenance method of Rubber Extrusion Production Line: 1. The rubber extruder machine should be placed in a ventilated position to ensure that the heat of the motor is dissipated to prolong its life; the machine should be well grounded. 2. Regularly check the tool screws. After using the new machin...

How many types of rubber extruders can be divided into? Rubber extruders can be divided into EPDM rubber extruders, silicone rubber extruders, butyl rubber extruders, and nitrile rubber extruders. According to different feeding methods, it can be divided into cold-feed rubber extruders and hot-feed ...

The rotary motion is produced by the friction between the rubber material and the screw. Due to the large friction force between the barrel wall and the rubber material, it cannot rotate with the screw at the same time. Therefore, there is a forward axis during the rotary motion to move. The fluid-l...

What is the auxiliary equipment of the extruder? The auxiliary equipment of the rubber extruder mainly includes a pay-off device, a straightening device, a preheating device, a cooling device, a traction device, a meter counter, a spark tester, and a wire take-up device. The use of the extrusion uni...

The reasons for the abnormal noise during the operation of the rubber extruder are as follows: 1. In the reducer, it may be caused by bearing damage or poor lubrication, or it may be caused by gear wear, improper installation and adjustment, or poor meshing. It can be achieved by replacing bearings,...

Advantages of rubber extruder 1. High output It has other advantages over ordinary twin-screw extruders and can achieve high output. 2. Reduce production costs When manufacturing masterbatches, it is often necessary to change the color. If there is a need to change the product, the open processing a...

In extrusion molding equipment, the extruder is usually called the main engine, and the subsequent equipment extrusion molding machine that is matched with it is called the auxiliary machine. Extruder derives twin-screw, multi-crew by original single screw rod, and even dose not have different types...

The following problems should be paid attention to during the maintenance of the rubber vulcanizer: 1. The storage environment of the vulcanizer should be kept dry and well ventilated to avoid the circuit being damp due to humidity; 2. Do not use the curing machine outdoors in cloudy and rainy days ...