Silicone extruder 　　 is used for the extrusion of silicone materials. It is a basic equipment in the silicone industry and plays a very important role in the fields of silicone products and LED light strips. It is mainly composed of power motor, reduction box, speed controller, feed port, extrusi...

1. Barrel 　　The barrel cooperates with the screw during work, so that the rubber material is subject to the interaction of the inner wall of the barrel and the rotating screw to ensure that the rubber material moves and mixes under pressure. Usually it also plays a role in heat exchange. 2. Screw 　　...

The rubber extruder machine mainly plays the role of extrusion molding in the production of rubber products, that is to say, the rubber extruder processes the banburying and smelting rubber and then extrudes it into the product shape we need. Produced the production of the product. The feeding syst...

In the production of rubber products, an indispensable equipment is the rubber extruder. Therefore, if you are a rubber manufacturing company, it is necessary to purchase such a piece of equipment, and its price has naturally become a frequent concern for many users Focus on the topic, in fact, the ...

Composition, in the rubber extruder machine, in general, the most basic and most common is a single screw extruder. It mainly includes six parts: transmission, feeding device, barrel, screw, head and die. Transmission part The transmission part is usually composed of a motor, a reduction box and a b...

The rubber extruder play an important role in the production of rubber products. Many of our common rubber products are extruded by rubber extruders. When we purchase a rubber extruder, we must choose the configuration and model of the rubber extruder according to the type of product. When we purch...

Many types of rubber extruder machine are used in the food industries and several designs are possible for a food extruder. The most commonly used extruder consists of the flighted screw(s) or worm(s) rotating within a sleeve or barrel to be termed as the screw extruder. However, the piston type ext...

Twin screw rubber extruder machine has three different extrusion systems: 　　1, non-intermeshing co-rotating twin screw extrusion system 　　 In the non-intermeshing twin-screw extrusion system, in addition to the movement form towards the machine head, there are also many flow modes for the material....

All extrusion processes require the generation of pressure within the material to be extruded. When materials are put under pressure heat is generated. This cannot be avoided but different extrusion types generate different amounts of heat. There are basically three different types of rubber extrude...

The rubber extruder barrel is normally supported in some way by the frame on which the whole system is mounted. If the extruder barrel moves, and this can happen sometimes even when the barrel is supported, it can indicate that the extruder shaft is bent, the barrel is misaligned, or a combination o...

The steps of rubber extruder debugging are as follows: 　　 1. The temperature control check should be done before starting to make sure that the temperature control is normal, the instrument is normal, and the cooling water circuit is unblocked. 　　2. The screw, barrel and die of the rubber extruder n...

The head of the rubber extruder machine is installed on the rubber extruder. The correct installation of the rubber extruder head is the basic condition to keep the rubber extruder in good working condition. The correct installation of the rubber extruder head is crucial . 　　 The following are the i...