Info-Zhejiang Baina Rubber & Plastic Equipment Co., Ltd.

14 Oct, 2020

All extrusion processes require the generation of pressure within the material to be extruded. When materials are put under pressure heat is...

14 Oct, 2020

The rubber extruder barrel is normally supported in some way by the frame on which the whole system is mounted. If the extruder barrel moves...

09 Oct, 2020

The steps of rubber extruder debugging are as follows: 　　 1. The temperature control check should be done before starting to make sure that ...

29 Sep, 2020

The head of the rubber extruder machine is installed on the rubber extruder. The correct installation of the rubber extruder head is the bas...

29 Sep, 2020

1. Feeding section 　　It is also called the solid conveying section, which starts from the feed port until the rubber melts. After the rubber...

25 Sep, 2020

You might be surprised to know that the rubber in your tires and so many other modern uses begins as a white, liquid type substance called l...

23 Sep, 2020

With the emergence and wide application of rubber extruder machine, the application range of hot feed extruders is gradually shrinking. Rubb...

18 Sep, 2020

The rubber hot air oven is an electrical device which is used in the various industries. The device uses hot dry steam for the sterilization...

16 Sep, 2020

The extruder has two different types depending on the drive. These are Direct extruder and Bowden extruder. Direct extruderIn direct extrude...