serial number

name

scale

relative site orientation

Relative factory boundary distance /m

protection level

1

Yang Mansion village

about 1206 people

West

168

"Ambient Air Quality Standard"( GB3095-2012 ) and the secondary standard in the amendment sheet

2

Houde Village

about 1011 people

north

466

content

elements

exhaustion hole ( serial number,

name )/ pollution source

Pollutant Project

Environmental Protection Measures

Executive standard

Atmospheric Environment

Big material feeding dust

DA002

( Rely on )

particulates

Big material feeding dust After being collected by the gas collecting hood, it passes through the bag filter ( TA004 ) processing, collecting air volume 10 000m ³ /h , processed by 15m Exhaust DA002 high-altitude emissions, Relying on existing waste gas collection and treatment facilities.

"Rubber Products Industrial Pollutant Discharge Standard" ( GB27632-2011 )

Small feed dust

DA005

( Rely on )

particulates

Small feed dust After being collected by the gas collecting hood, it passes through the bag filter ( TA005 ) processing, collecting air volume 25 00m ³ /h , processed by 15m Exhaust DA005 High-altitude emissions; Relying on existing waste gas collection and treatment facilities.

Exhaust gas from rubber refining and vulcanization DA003

( Rely on )

particulates, total non-methane hydrocarbons, CS _{2 ,} Odor concentration

The waste gas from banburying is collected by the gas collecting hood and is collected by the bag dust removal device ( TA003 ) after treatment, together with the refining and vulcanization waste gas collected by the gas collecting hood, the low-temperature plasma Activated carbon adsorption device ( TA00 4 ) deal with , to collect air volume 2 0 000m ³ /h , processed by 15m Exhaust DA003 High-altitude emissions; Relying on existing waste gas collection and treatment facilities.

" Discharge Standard of Pollutants for Rubber Products Industry "( GB27632-2011 ), " Emission Standards for Odor Pollutants "( GB14554-93 )

extrude exhaust gas DA002

( Rely on )

particulates, total non-methane hydrocarbons, CS ₂

Squeeze out the exhaust After being collected by the gas collecting hood, the spray tower dry filtration low temperature plasma Activated carbon adsorption device ( TA005 ) process, collect air volume 20 000m ³ /h , processed by 15m Exhaust DA002 High-altitude emissions; Relying on the existing exhaust gas treatment facilities, the gas collection hood and exhaust gas pipeline will be newly built.

" Discharge Standard of Pollutants for Rubber Products Industry "( GB27632-2011 ), " Emission Standards for Odor Pollutants "( GB14554-93 )

boiler natural gas combustion exhaust gas DA006 ( Rely on )

particulates, NOx , SO ₂ , Ringelmann blackness

boiler natural gas combustion exhaust gas pass 10 m Exhaust DA006 Discharge at high altitude. Rely on existing exhaust gas collection pipes and vents.

Emissions of particulate matter, sulfur dioxide and Ringelmann blackness in boiler natural gas combustion exhaust gas are implemented in " Boiler Air Pollutant Emission Standards "( GB13271-2014 ) in table 3 The special emission limits of air pollutants and the emission of nitrogen oxides are implemented in the "Notice on Carrying out the Low-nitrogen Transformation Work of Taizhou Gas-fired Boilers" (Taiwan Development Co., Ltd. [2019]37 number) related standards

Surface water environment

waste water outlet

DW001

pH , COD _Cr , ammonia nitrogen, Petroleum, suspended solids, etc.

A small part of the domestic sewage is discharged into the biochemical pool of the wastewater treatment facility in the factory area after pretreatment in the septic tank built in the factory area to make nutrient solution, and most of it is directly discharged into the municipal sewage pipe network, and the production wastewater The proposed waste water treatment in the factory area stand (coagulation sedimentation Biochemical treatment) is discharged into the municipal sewage pipe network after being treated up to the standard, and discharged after being treated up to the standard by the Xianju County Urban Sewage Treatment Plant.

Management indicators: "Rubber Products Industrial Pollutant Discharge Standards" ( GB27632-2011 ) Chinese table 2 Indirect discharge limits of water pollutants for new enterprises;

Sewage treatment plant Outlet water standard: implement the "Discharge Standard of Main Water Pollutants for Urban Sewage Treatment Plants in Zhejiang Province" ( DB33/2169-2018 ), and the emission of factors not specified in the standard shall be carried out in the Discharge Standard of Pollutants for Urban Sewage Treatment Plants ( GB18918-2002 ) level A standard. In addition, according to the requirements of local management departments, sewage treatment plants COD and ammonia nitrogen factor discharge in accordance with the quasi-surface water determined in the "Taizhou Municipal Sewage Treatment Plant Outlet Indicators and Standard Limit Table (Trial)" IV Class standard for total control .

Acoustic environment

production workshop

noise

1 , In the stage of design and equipment procurement, low-noise equipment is preferred to control the noise source intensity from the source;

2 , Reasonably arrange the layout of the workshop;

3 , The bottom of the high-noise equipment is equipped with a shock-absorbing pad for shock absorption;

4 , Strengthen the maintenance of equipment, ensure that the equipment is in good operating condition, and eliminate the high noise phenomenon caused by abnormal operation of the equipment;

5 1. Enterprises close doors and windows during production. After taking the above noise prevention and control measures, it is expected that the noise at the factory boundary will meet the emission standards, and the noise will have little impact on the surrounding environment.

Factory Boundary Noise Execution "Environmental Noise Emission Standards at the Boundary of Industrial Enterprises" ( GB12348-2008 ) 3 Class Standard Limit Requirements

Electromagnetic radiation

none

Solid Waste

General waste packaging materials, waste ion exchange resin, etc. Belongs to general industrial solid waste, after collection Sale of related companies for comprehensive utilization , Enterprises need to establish a general industrial solid waste management ledger to truthfully record the type, quantity, flow, storage, utilization, disposal and other information of industrial solid waste generated. When entrusting others to transport, utilize, or dispose of industrial solid waste, the entrusted party's qualifications and technical capabilities shall be verified, and a written contract shall be signed in accordance with the law, and the pollution prevention and control requirements shall be stipulated in the contract. . Household garbage is entrusted to the sanitation department for unified removal and transportation.

Waste chemical packaging materials, waste lubricating oil, waste oil barrels, sludge, waste activated carbon, etc. belong Hazardous Waste , Entrust qualified units for unified safe disposal , temporary storage room Relevant signs and warning signs should be pasted on the outside, and hazardous waste should be stored in different categories, packaged in a standardized manner and Windproof, sunscreen, rainproof, anti-leakage , not to be piled up randomly, regularly transferred and entrusted with qualified units for safe disposal, and strictly enforced Pollution Control Standards for Hazardous Waste Storage ( GB18597-2023 ), "Technical Specifications for Hazardous Waste Collection, Storage, and Transportation" ( HJ 2025-2012 ) and other documents. In daily management, it is necessary to implement the registration system for reporting, Create ledger Hazardous waste disposal should implement the system of approval and transfer form.

Soil and Groundwater

Pollution Prevention Measures

Strengthen clean production work, reduce from the source " Three wastes " generation and reduce the environmental burden. Enterprises need to do a good job of exhaust gas in accordance with the requirements of environmental impact assessment waste water Prevention and control, ground hardening and anti-seepage in different areas, solid waste collection and disposal, and regular inspections to prevent accidents. Strictly implement anti-seepage measures in different areas, conduct regular inspections, and repair in time. Hazardous waste warehouses, waste water treatment station, Paraffin oil storage tank area It is the key anti-seepage area.

Ecological protection measures

none

environmental risk

Precautions

1 , Strictly implement relevant laws and regulations and relevant rules and regulations, operate according to procedures, and minimize the probability of risk accidents caused by operational errors.

2 , Hazardous substances are stored and managed in strict accordance with relevant regulations, and fire-fighting measures are equipped.

3 , Complete environmental protection facilities must be established during the production process to ensure the normal and stable daily operation of terminal treatment facilities such as waste gas and waste water, and to avoid sudden environmental pollution accidents such as excessive discharge. In order to ensure processing efficiency, during the maintenance of workshop equipment, the terminal treatment system should also be overhauled at the same time, and a special person should be responsible for daily maintenance.

Completion acceptance monitoring

The project completion acceptance monitoring plan mainly starts from the following aspects:

( 1 ) Whether the actual production capacity of each production device meets the conditions for completion acceptance, if the project is constructed in stages, then " three at the same time " Acceptance is also carried out in stages accordingly.

( 2 )according to " three at the same time " Requirements, whether all environmental protection facilities are installed in place, and whether they are operating normally.

( 3 ) The environmental protection completion acceptance monitoring content of the project is shown in the table below.

Project environmental protection completion acceptance monitoring content

other environment

management requirements

1 , According to the "Stationary Pollution Source Pollutant Discharge Permit Classified Management List ( 2019 Annual Edition) (Decree of the Ministry of Ecology and Environment No. 45 Number), enterprise belong " twenty four , Rubber and Plastic Products Industry 2 9 —— Rubber Products Industry 291 —— Annual glue consumption other than key management 2000 Manufacture of rubber sheets, pipes and belts of tons and above " , belonging to the implementation simplified management " industry.

2 , The existing projects in the enterprise's modern factory area have been declared for pollutant discharge on the national pollutant discharge permit information management platform, and the 2022 Year 2 moon 23 Daily renewal of pollutant discharge permit, pollutant discharge permit number 91331024798555880A001X .

3 , According to the "Regulations on the Administration of Pollutant Discharge Permits" (Order of the State Council of the People's Republic of China, No. 736 Number) " Article 15 —— During the validity period of the pollutant discharge permit, new construction, reconstruction and expansion of projects that discharge pollutants shall apply for a new pollutant discharge permit. " , so this technical transformation project was re-applied for the pollutant discharge permit before it was completed and put into operation.